Synonyms:ferrous ammonium sulfate
CAS No.: 10045-89-3 Anhydrous; (7783-85-9 Hexahydrate)
Molecular Weight: 392.13
Chemical Formula: Fe(NH4)2(SO4)2 6H2O
Product Codes: 937
Ingredient CAS No Percent Hazardous
--------------------------------------- ------------ ------------ ---------
Ferrous Ammonium Sulfate 10045-89-3 90 - 100% Yes
Inhalation: Causes irritation to the respiratory tract. Symptoms may
include coughing, shortness of breath.
Ingestion: Causes irritation to the gastrointestinal tract. Symptoms may include nausea, vomiting and diarrhea. Low toxicity in small quantities but larger dosages may cause nausea, vomiting, diarrhea, and black stool. Pink urine discoloration is a strong indicator of iron poisoning. Liver damage, coma, and death from iron poisoning has been recorded.
Skin Contact: Causes irritation to skin. Symptoms include redness, itching, and pain.
Eye Contact: Causes irritation, redness, and pain.
Chronic Exposure: No information found.
Aggravation of Pre-existing Conditions: Persons with pre-existing skin disorders or eye problems, or impaired liver, kidney or respiratory function may be more susceptible to the effects of the substance.
Inhalation: Remove to fresh air. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen. Get medical
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.
Fire: Not considered to be a fire hazard. Irritating
and toxic ammonia gas may form in fires.
Explosion: Not considered to be an explosion hazard. Sealed containers may rupture when heated.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: Use protective clothing and breathing equipment appropriate for the surrounding fire.
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8.
Keep in a tightly closed light-resistant container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Airborne Exposure Limits: -ACGIH Threshold Limit
1 mg/m3 (TWA) soluble iron salt as Fe
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a half facepiece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Appearance: Pale blue-green crystals.
Solubility: 26.9 g/100cc water @ 20C (68F)
Specific Gravity: 1.86
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: 100 - 110C (212 - 230F)
Vapor Density (Air=1): > 1.0
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
Stability: Stable under ordinary conditions of use
and storage. Slowly oxidizes in moist air.
Hazardous Decomposition Products: May emit ammonia, oxides of sulfur, oxides of nitrogen, and oxides of carbon.
Hazardous Polymerization: Will not occur.
Incompatibilities: Sulfuric acid
Conditions to Avoid: Heat, light, moisture.
Oral rat LD50: 3250 mg/kg
Ingredient Known Anticipated IARC Category
------------------------------------ ----- ----------- -------------
Ferrous Ammonium Sulfate No No None
Environmental Fate: No information found.
Environmental Toxicity: No information found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
|Ph Indicator||Chemicals Lab Bulk||Catalyst||Food Colour||Herbs||Intermediates|
|Cesium Salts||Ion Pair Reagents||Direct Dyes||Contact details||Acid Dyes||Solvents|
|Sales : email@example.com||Email: firstname.lastname@example.org|
AA BC DM N S T Z