1: Chemical Product and Company Identification
Name: Sodium bismuthate
Name: Not available.
2: Composition and Information on Ingredients
% by Weight
Data on Ingredients: Sodium
bismuthate LD50: Not available. LC50: Not available.
3: Hazards Identification
Acute Health Effects: Hazardous
in case of eye contact (irritant), of inhalation.
Chronic Health Effects:Hazardous
in case of eye contact (irritant), of inhalation. CARCINOGENIC EFFECTS: Not
available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available. The substance is toxic to lungs, mucous
membranes. Repeated or prolonged exposure to the substance can produce target
4: First Aid Measures
Contact: Check for and
remove any contact lenses. Do not use an eye ointment. Seek medical attention.
Contact: No known effect
on skin contact, rinse with water for a few minutes.
Skin Contact: Not
Allow the victim to rest
in a well ventilated area. Seek immediate medical attention.
Inhalation: Not available.
not induce vomiting. Loosen tight clothing such as a collar, tie, belt or
waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation.
Seek immediate medical attention.
Ingestion: Not available.
5: Fire and Explosion Data
of the Product: Non-flammable.
Points: Not applicable.
Limits: Not applicable.
of Combustion: Not
Hazards in Presence of Various Substances: Not
Hazards in Presence of Various Substances:
of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not
Fighting Media and Instructions: Not
Remarks on Fire Hazards: Not
Remarks on Explosion Hazards: Not
6: Accidental Release Measures
tools to put the spilled solid in a convenient waste disposal container. Finish
cleaning by spreading water on the contaminated surface and dispose of according
to local and regional authority requirements.
Spill:Use a shovel to put
the material into a convenient waste disposal container. Finish cleaning by
spreading water on the contaminated surface and allow to evacuate through the
7: Handling and Storage
not breathe dust. Avoid contact with eyes Wear suitable protective clothing In
case of insufficient ventilation, wear suitable respiratory equipment If you
feel unwell, seek medical attention and show the label when possible.
specific storage is required. Use shelves or cabinets sturdy enough to bear the
weight of the chemicals. Be sure that it is not necessary to strain to reach
materials, and that shelves are not overloaded.
8: Exposure Controls/Personal Protection
enclosures, local exhaust ventilation, or other engineering controls to keep
airborne levels below recommended exposure limits. If user operations generate
dust, fume or mist, use ventilation to keep exposure to airborne contaminants
below the exposure limit.
goggles. Lab coat.
Protection in Case of a Large Spill:
goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be
sufficient; consult a specialist BEFORE handling this product.
Limits: Not available.
9: Physical and Chemical Properties
state and appearance: Solid.
Weight: 279.97 g/mole
(1% soln/water): Not
Point: Not available.
Gravity: Not available.
Pressure: Not applicable.
Density: Not available.
Threshold: Not available.
Dist. Coeff.: Not
(in Water): Not available.
Properties: Not available.
10: Stability and Reactivity Data
The product is stable.
of Instability: Not
with various substances: Not
Non-corrosive in presence
Remarks on Reactivity: Not
Remarks on Corrosivity: Not
11: Toxicological Information
of Entry: Eye contact.
Not available. LC50: Not available.
Effects on Humans: The
substance is toxic to lungs, mucous membranes.
Toxic Effects on Humans: Hazardous
in case of inhalation.
Remarks on Toxicity to Animals: Not
Remarks on Chronic Effects on Humans: Not
Remarks on other Toxic Effects on Humans: Not
12: Ecological Information
and COD: Not available.
hazardous short term degradation products are not likely. However, long term
degradation products may arise.
of the Products of Biodegradation: The
product itself and its products of degradation are not toxic.
Remarks on the Products of Biodegradation: Not
13: Disposal Considerations
14: Transport Information
Classification: Not a DOT
Provisions for Transport: Not
15: Other Regulatory Information
and State Regulations: TSCA
8(b) inventory: Sodium bismuthate
Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
(Canada): CLASS D-2A:
Material causing other toxic effects (VERY TOXIC).
(EEC): R36- Irritating to
Fire Protection Association (U.S.A.):
applicable. Lab coat. Wear appropriate respirator when ventilation is
inadequate. Splash goggles.
NILE CEHMCIALS provides the information contained herein
in good faith but makes no representation as to its comprehensiveness or
accuracy. This document is intended only as a guide to the appropriate
precautionary handling of the material by a properly trained person using this
product. Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose. NILE
CHEMICALS MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE
PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, NILE CHEMICALS WILL NOT BE
RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.
|Ph Indicator||Chemicals Lab Bulk||Catalyst||Food Colour||Herbs||Intermediates|
|Cesium Salts||Ion Pair Reagents||Direct Dyes||Contact details||Acid Dyes||Solvents|