Silver iodide MSDS
Section 1: Chemical Product and Company Identification
Product Name: Silver iodide
Catalog Codes: 191134
Chemical Formula: AgI
International Sales: 91-22-66313162
Section 2: Composition and Information on Ingredients
Name CAS # % by Weight
Silver iodide 7783-96-2 100
Toxicological Data on Ingredients: Silver iodide: ORAL (LD50): Acute: 2820 mg/kg [Rat].
Section 3: Hazards Identification
Potential Acute Health Effects: Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure is not known to aggravate medical condition.
Section 4: First Aid Measures
Eye Contact: Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin
with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin.
Cover the irritated skin with an emollient. If irritation persists, seek medical attention.
Serious Skin Contact:Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation: Not available.
Ingestion:Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not
breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Not available.
Fire Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media and Instructions: Not applicable.
Special Remarks on Fire Hazards: Not available.
Special Remarks on Explosion Hazards: Not available.
Section 6: Accidental Release Measures
Small Spill:Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by
spreading water on the contaminated surface and dispose of according to local and regional authority
Large Spill:Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water
on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not
present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
Section 7: Handling and Storage
Precautions:Do not ingest. Do not breathe dust. Wear suitable protective clothing In case of insufficient ventilation, wear
suitable respiratory equipment If ingested, seek medical advice immediately and show the container or the label.
Avoid contact with skin and eyes
Storage:No specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be
sure that it is not necessary to strain to reach materials, and that shelves are not overloaded.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
Personal Protection:Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist
BEFORE handling this product.
TWA: 0.01 (mg/m3) from ACGIH
Consult local authorities for acceptable exposure limits.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid.
Odor: Not available.
Taste: Not available.
Molecular Weight: 234.79 g/mole
Color: Not available.
pH (1% soln/water): Not applicable.
Boiling Point: 1506°C (2742.8°F)
Melting Point: 552°C (1025.6°F)
Critical Temperature: Not available.
Specific Gravity: 5.675 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: Not available.
Solubility: Insoluble in cold water, hot water.
Section 10: Stability and Reactivity Data
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Not available.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Section 11: Toxicological Information
Routes of Entry: Eye contact. Inhalation. Ingestion.
Toxicity to Animals: Acute oral toxicity (LD50): 2820 mg/kg [Rat].
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant), of ingestion, of inhalation.
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: Not available.
Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Section 14: Transport Information
DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Special Provisions for Transport: Not applicable.
Section 15: Other Regulatory Information
Federal and State Regulations:
Pennsylvania RTK: Silver iodide
Massachusetts RTK: Silver iodide
TSCA 8(b) inventory: Silver iodide
CERCLA: Hazardous substances.: Silver iodide
Other Regulations: Not available..
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC): R36/38- Irritating to eyes and skin.
Health Hazard: 2
Fire Hazard: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Section 16: Other Information
The information above is believed to be accurate and represents the best information currently available to us. However, we
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we
assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the
information for their particular purposes. In no event shall Nile chemicals be liable for any claims, losses, or damages of any
third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even
if Nile Chemicals has been advised of the possibility of such damages.
|Ph Indicator||Chemicals Lab Bulk||Catalyst||Food Colour||Herbs||Intermediates|
|Cesium Salts||Ion Pair Reagents||Direct Dyes||Contact details||Acid Dyes||Solvents|
|Sales : email@example.com||Email: firstname.lastname@example.org|
AA BC DM N S T Z