|
|
NILE CHEMICALS
CAS No.: 7782-91-4
Molecular Weight: 1163.9
Chemical Formula: (NH4)6Mo7O24
Product Codes: 962
Ingredient CAS No Percent Hazardous --------------------------------------- ------------ ------------ --------- Molybdic Acid 85% 7782-91-4 90 - 100% Yes
Inhalation:Inhalation of dust irritates respiratory tract. May cause pulmonary disorders. Can be a route of absorption by the body with symptoms similar to ingestion.
Ingestion:Irritant to the digestive system. Symptoms of sore throat, abdominal pain, nausea may occur. May cause anemia,gout, headaches, weight loss, joint pain, and liver or kidney damage.
Skin Contact:Causes irritation to skin. Symptoms include redness, itching, and pain.
Eye Contact:Causes irritation, redness, and pain.
Chronic Exposure:Prolonged or repeated exposure to this product may cause symptoms similar to ingestion.
Aggravation of Pre-existing Conditions:Persons with pre-existing skin disorders, blood disorders or eye problems, or impaired liver, kidney or respiratory function may be more susceptible to the effects of the substance.
Inhalation:Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion:Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact:Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact:Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Fire:Not considered to be a fire hazard.
Explosion:Not considered to be an explosion hazard.
Fire Extinguishing Media:Use any means suitable for extinguishing surrounding fire.
Special Information:In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8.
Keep in a tightly closed container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Airborne Exposure Limits:-OSHA Permissible Exposure Limit (PEL):5 mg/m3 for soluble molybdenum compounds as Mo
15 mg/m3 for insoluble molybdenum compounds as Mo -ACGIH Threshold Limit Value (TLV):
Molybdenum, metal and insoluble compounds, inhalable fraction, as Mo: 10 mg/m3
Molybdenum, metal and insoluble compounds, respirable fraction, as Mo: 3 mg/m3
Molybdenum, soluble compounds, respirable fraction, as Mo: 0.5 mg/m3, A3 - Confirmed animal carcinogen with unknown relevance to humans
Ventilation System:A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):If the exposure limit is exceeded and engineering controls are not feasible, a half facepiece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Appearance:Fine, white to pale yellow powder.
Odor:Odorless.
Solubility:Slightly soluble in water.
Density:No information found.
pH:No information found.
% Volatiles by volume @ 21C (70F):0
Boiling Point:Not applicable.
Melting Point:115C (239F)
Vapor Density (Air=1):No information found.
Vapor Pressure (mm Hg):No information found.
Evaporation Rate (BuAc=1):No information found.
Stability:Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:Burning may produce ammonia, nitrogen oxides and metal fumes.
Hazardous Polymerization:Will not occur.
Incompatibilities:Alkali metals
Conditions to Avoid:Incompatibles.
Molybdenum trioxide: Oral rat LD50: 2689 mg/kg; Inhalation rat LC50: > 5840 mg/m3/4-hr; Skin rat LD50: > 2000 mg/kg. Investigated as a tumorigen. Ammonium molybdate: Investigated as a mutagen.
--------\Cancer Lists\------------------------------------------------------
---NTP Carcinogen---
Ingredient Known Anticipated IARC Category
------------------------------------ ----- ----------- -------------
Molybdic Acid 85% (7782-91-4) No No None
Environmental Fate:No information found.
Environmental Toxicity:No information found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
Not regulated.
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Molybdic Acid 85% (7782-91-4) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
Molybdic Acid 85% (7782-91-4) Yes Yes No Yes
--------\Federal, State & International Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
----------------------------------------- --- ----- ---- --------------
Molybdic Acid 85% (7782-91-4) No No No No
--------\Federal, State & International Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
Molybdic Acid 85% (7782-91-4) No No No
Nile Chemicals provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. NILE CHEMICALS MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, NILE CHEMICALS WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.
www.nilechemicals.comnilesh@nilechemicals.com sales@nilechemicals.com