NILE CHEMICALS

Material Safety Data Sheet

2,6-Dichloroindophenol sodium salt MSDS
Section 1: Chemical Product and Company Identification
Product Name: 2,6-Dichloroindophenol sodium salt
Catalog Codes: 43919
CAS#: 620-45-1
RTECS: GU5495000
TSCA: TSCA 8(b) inventory: 2,6-Dichloroindophenol
sodium salt
CI#: Not available.
Synonym: 2,6-Dichloro-4-[(4-hydroxyphenyl)imino]-2,5-
cyclohexadien-1-one sodium salt
Chemical Formula: C12H6CL2NNaO2
Contact Information:
Nile chemicals
Mumbai
For non-emergency assistance, call 91 22 66313162
Section 2: Composition and Information on Ingredients
Composition:
Name CAS # % by Weight
{2,6-}Dichloroindophenol sodium salt 620-45-1 100
Toxicological Data on Ingredients: 2,6-Dichloroindophenol sodium salt LD50: Not available. LC50: Not available.
Section 3: Hazards Identification
Potential Acute Health Effects:
Extremely hazardous in case of ingestion. Very hazardous in case of skin contact (permeator), of eye contact (irritant), of
inhalation. Hazardous in case of skin contact (irritant). Inflammation of the eye is characterized by redness, watering, and
itching.
Potential Chronic Health Effects:
Extremely hazardous in case of ingestion. Very hazardous in case of skin contact (permeator), of eye contact (irritant), of
inhalation. Hazardous in case of skin contact (irritant). CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS:
Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available.
Section 4: First Aid Measures
Eye Contact:
p. 2
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids
open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
Skin Contact:
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running
water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used.
Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before
reusing.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation: Not available.
Ingestion:
Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform
mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available.
Section 5: Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: Not available.
Flammable Limits: Not available.
Products of Combustion: These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2...). Some metallic oxides.
Fire Hazards in Presence of Various Substances:
Flammable in presence of open flames and sparks. Slightly flammable to flammable in presence of heat.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in
presence of static discharge: Not available.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on Fire Hazards: Not available.
Special Remarks on Explosion Hazards: Not available.
Section 6: Accidental Release Measures
Small Spill:
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on
the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill:
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the
contaminated surface and allow to evacuate through the sanitary system.
Section 7: Handling and Storage
Precautions:
p. 3
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a
fume hood. Ground all equipment containing material. Do not breathe dust. In case of insufficient ventilation, wear suitable
respiratory equipment If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and
eyes
Storage:
Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a
cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing
agents.
Section 8: Exposure Controls/Personal Protection
Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants
below the exposure limit.
Personal Protection:
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
product.
Exposure Limits: Not available.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid. (Powdered solid.)
Odor: Not available.
Taste: Not available.
Molecular Weight: 290.08 g/mole
Color: Green. (Dark.)
pH (1% soln/water): Not available.
Boiling Point: Not available.
Melting Point: Decomposes.
Critical Temperature: Not available.
Specific Gravity: Not available.
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water, methanol.
Solubility:
Easily soluble in cold water. Soluble in methanol.
p. 4
Section 10: Stability and Reactivity Data
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Not available.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Polymerization: No.
Section 11: Toxicological Information
Routes of Entry: Dermal contact. Eye contact. Inhalation. Ingestion.
Toxicity to Animals:
LD50: Not available. LC50: Not available.
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans:
Extremely hazardous in case of ingestion. Very hazardous in case of skin contact (permeator), of inhalation. Hazardous in
case of skin contact (irritant).
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: Not available.
Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Waste Disposal:
Section 14: Transport Information
DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Special Provisions for Transport: Not applicable.
p. 5
Section 15: Other Regulatory Information
Federal and State Regulations: TSCA 8(b) inventory: 2,6-Dichloroindophenol sodium salt
Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
Other Classifications:
WHMIS (Canada): CLASS D-2B: Material causing other toxic effects (TOXIC).
DSCL (EEC):
R38- Irritating to skin. R41- Risk of serious damage to eyes.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 1
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 1
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator
when ventilation is inadequate. Splash goggles.
Section 16: Other Information
References: Not available.
Other Special Considerations: Not available.
The information above is believed to be accurate and represents the best information currently available to us. However, we
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume
no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for
their particular purposes. In no event shall Nile Chemicals be liable for any claims, losses, or damages of any third party or for
lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Nile Chemicals
has been advised of the possibility of such damages.

 

 Product range

Ph Indicator Chemicals  Lab    Bulk       Catalyst Food Colour  Herbs Intermediates
Cesium Salts Ion Pair Reagents Direct Dyes Contact details Acid Dyes Solvents

PRODUCT LIST
nilesh@nilechemicals.com sales@nilechemicals.com