1)Identification
of substance:
- Product
name: PHENOLPHTHALEIN
INDICATOR
- Manufacturer/Supplier:
NILE CHEMICALS
Web Site: www.nilechemicals.com
Email: nilechem@vsnl.net
- Information
Department:
Health, Safety and Environmental Department
|
2)Composition/Data
on components:
- Chemical
characterization: Phenolphthalein
|
3)Hazards
identification:
- Hazard
description: Xi
Irritant
- Information
pertaining to particular dangers for man and environment
R 36/38 Irritating to eyes and skin. R 43 May cause
sensitization by skin contact.
- Classification
system
- HMIS
ratings (scale 0-4)
Hazardous Materials Identification System)
Health (acute effects) = 2
Flammability = 1
Reactivity = 1
|
4)First
aid measures:
- After
inhalation
Supply fresh air and to be sure call for a doctor.Seek immediate
medical advice.
- After
skin contact
Immediately wash with water and soap and rinse thoroughly.
After eye contact
Rinse opened eye for several minutes under running water. Then
consult a doctor.
- After
swallowing Seek
immediate medical advice.
|
5)Fire
fighting measures:
- Suitable
extinguishing agents
Carbon dioxide, extinguishing powder or water spray. Fight larger
fires with water spray or alcohol resistant foam.
- Special
hazards caused by the material, its products of combustion or
resulting gases:
In case of fire, the following can be released :Carbon monoxide and
carbon dioxide
- Protective
equipment:
Wear self-contained respirator. Wear fully protective impervious
suit.
|
6)Accidental
release measures:
- Person-related
safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
- Measures
for environmental protection:
Do not allow material to be released to the environment without
proper governmental permits.
- Measures
for cleaning/collecting:
Pick up mechanically.
- Additional
information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
|
7)Handling
and storage:
- Handling
- Information
for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
- Information
about protection against explosions and fires:
No special measures required.
- Storage
- Requirements
to be met by storerooms and receptacles:
No special requirements.
- Information
about storage in one common storage facility:
Store away from oxidizing agents.
|
8)Exposure
controls and personal protection:
- Additional
information about design of technical systems:
Not required.
Components with limit values that require monitoring at the
workplace:
Not required.
- Additional
information: No
data
- Personal
protective equipment
- General
protective and hygienic measures
The usual precautionary measures for handling chemicals should be
followed.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
- Breathing
equipment:
Use suitable respirator when high concentrations are present.
- Protection
of hands:
Impervious gloves
- Eye
protection: Safety
glasses
- Body
protection:
Protective work clothing.
|
9)Physical
and chemical properties:
- General
Information
- Form:
Powder
- Color:
White Coloured Powder
- Odor:
Odorless
-
Value/Range Unit Method
- Change
in condition
- Melting
point/Melting range:
255-260 ° C
- Boiling
point/Boiling range:
Not determined
- Sublimation
temperature / start:
Not determined
- Flash
point:
Not applicable
- Ignition
temperature:
Not determined
- Decomposition
temperature:
Not determined
- Danger
of explosion:Product
does not present an explosion hazard.
- Explosion
limits:
- Lower:
Not determined
- Upper:
Not determined
- Vapor
pressure:
Not determined
- Density:
at 20 ° C
1.299
g/cm³
- Solubility
in / Miscibility with
- Water:
Insoluble
|
10)Stability
and reactivity:
- Thermal
decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to
specifications.
- Materials
to be avoided:
Oxidizing agents
- Dangerous
reactions No
dangerous reactions known
- Dangerous
products of decomposition:
Carbon monoxide and carbon dioxide
|
11)Toxicological
information:
- Acute
toxicity:
- Primary
irritant effect:
- On
the skin: Irritant
to skin and mucous membranes.
- On
the eye:
Irritating effect.
- Other
information (about experimental toxicology):
Mutagenic effects have been observed on tests with bacteria.
- Subacute
to chronic toxicity:
Phenolphthalein ingestion may cause diarrhea, upset stomach, and
electrolyte inbalance. May cause skin, eye and respiratory
irritation on contact.
- Additional
toxicological information:
To the best of our knowledge the acute and chronic toxicity of this
substance is not fully known.
|
12)Ecological
information:
- General
notes:
Do not allow material to be released to the environment without
proper governmental permits.
|
13)Disposal
considerations:
- Product:
- Recommendation
Consult state, local or national regulations to ensure proper
disposal.
- Uncleaned
packagings:
- Recommendation:
Disposal must be made according to official regulations.
|
14)Transport
information:
Not a hazardous material
for transportation.
- DOT
regulations:
- Hazard
class:
None
- Land
transport ADR/RID (cross-border)
- ADR/RID
class:
None
- Maritime
transport IMDG:
- IMDG
Class:
None
- Air
transport ICAO-TI and IATA-DGR:
- ICAO/IATA
Class:
None
- Transport/Additional
information:
Not dangerous according to the above specifications.
|
15Regulations:
- Product
related hazard informations:
- Hazard
symbols: Xi
Irritant
- Risk
phrases:
36/38 Irritating to eyes and skin.
43 May cause sensitization by skin contact.
- Safety
phrases:
24 Avoid contact with skin.
26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
37 Wear suitable gloves.
- Information
about limitation of use:
For use only by technically qualified individuals.
|
16)Other
information:
Employers should use this
information only as a supplement to other information gathered by them,
and should make independent judgement of suitability of this information
to ensure proper use and protect the health and safety of employees.
This information is furnished without warranty, and any use of the
product not in conformance with this Material Safety Data Sheet, or in
combination with any other product or process, is the responsibility of
the user.
|